GARDASOFT RT Series User Manual page 20

WWW.STEMMER-IMAGING.COM WWW.STEMMER-IMAGING.COM
The lighting connections to an RTxxx are made through 4-way connectors
as shown below:
Ensure you set the current or voltage rating of your light before you
connect it, see Section 8, Lighting
The connectors fitted to an RT2xx, RT4xx, and an RT8xx series controller
are shown in the illustrations below. You should refer to
Trigger inputs for the pin allocations of the trigger connectors.
RT2xx
RTxxx LED lighting controllers - User Manual
setup.
— 20 —
Section 6.3,