GARDASOFT RT Series User Manual page 2

Copyright and disclaimer notice
EC conformity declaration
WWW.STEMMER-IMAGING.COM
Except as prohibited by law:
All hardware, software and documentation is provided on an 'as is' basis. This
information is for guidance only. Installers must perform their own risk assessment
specific to each installation.
It is essential that the user ensures that the operation of the product is suitable for
their application.
The user must ensure that incorrect functioning of this equipment cannot cause any
dangerous situation or significant financial loss to occur.
Deliberate acts of endangerment and vandalism are not covered by this document and
must be considered by the installer.
While care has been taken in the preparation of this document Gardasoft Vision Ltd will
not accept any liability for consequential loss of any kind except those required by law.
All trademarks acknowledged. This document is Copyright 2019 Gardasoft Vision Ltd.
The EC Certificate of Conformity is available from Gardasoft Vision Ltd on request
Issue status of this document: Issue v013 - July 2019
RTxxx LED controllers -User Manual