Wall Mount; Figure 3-5: Wall-Mounting Bracket - IEI Technology uIBX-210-CV-N2600 Series User Manual

uIB X-210-C V-N2600 E mbedded S ys tem

3.7.1 Wall Mount

To mount the embedded system onto a wall using the optional VESA 75 wall mount kit,
please follow the steps below.
Select the location on the wall for the wall-mounting bracket.
S tep 1:
Carefully mark the locations of the four brackets screw holes on the wall.
S tep 2:
Drill four pilot holes at the marked locations on the wall for the bracket retention
S tep 3:
screws.
Align the wall-mounting bracket screw holes with the pilot holes.
S tep 4:
Secure the mounting-bracket to the wall by inserting the retention screws into
S tep 5:
the four pilot holes and tightening them (Figure 3-5).

Figure 3-5: Wall-mounting Bracket

S tep 6: Insert the four mounting screws provided in the package into the four screw
holes on the bottom panel of the uIBX-210-CV-N2600 and tighten until the screw
shank is secured against the bottom panel (Figure 3-6).
Align the mounting screws on the bottom panel with the mounting holes on the
S tep 7:
bracket.
P age 17