Emerson Rosemount Wireless Permasense WT210 Quick Start Manual page 17

July 2019
Figure 6-3: Lanyard Installation
4. Feed the bare end of the lanyard through either lanyard hole in the
sensor housing, then through the stabilizer (between the
waveguides) as shown in
5. Feed the bare end of the lanyard into the return hole of the gripple.
Adjust the gripple to minimize the slack in the lanyard cable between
the attachment point and the sensor.
Quick Start Guide
A. Lanyard hole in sensor housing
B. Stabilizer
Figure 6-1
Quick Start Guide
17