Emerson Rosemount Wireless Permasense WT210 Quick Start Manual page 15

July 2019
2. When all of the above criteria are satisfactorily met, press the
Complete button.
3. Ensure all required sensor information is accurately logged (e.g.
sensor ID and location).
4. Remove the CC21 and fit the power module.
Note
When the power module is fitted, the sensor will restart and try to
join the WirelessHART
this can often take two hours and sometimes up to six hours.
Quick Start Guide
d) The measured thickness displayed in the bottom right of the
window is comparable with expectations for the
measurement location.
®
gateway. In a large network of 100 sensors,
Quick Start Guide
15