Additional Hardware - Emerson Rosemount Wireless Permasense WT210 Quick Start Manual

Quick Start Guide
6

Additional hardware

6.1 Lanyard installation
Procedure
1. Wrap the lanyard around the circumference of the pipe. The 6.6 ft. (2
m) length of lanyard will accommodate a maximum diameter of 20
in. (51 cm). When it is not possible to wrap the lanyard around a pipe,
find an alternative attachment point for the lanyard.
Figure 6-1: Lanyard Installation to Pipe/Fixed Attachment Point
2. Thread the bare end of the lanyard through the lanyard loop to
secure it to the pipe as shown in Figure 6-1.
Figure 6-2: Gripple Installation
3. Feed the bare end of the lanyard into the gripple as shown in Figure
6-2 and push the gripple 18 in. (45 cm) in from the bare end.
16
July 2019
Emerson.com/Rosemount