Huawei OceanStor 2000 V3 Series Features Manual page 67

OceanStor V3 Series
HyperMetro Feature Guide for Block
2.
3.
Issue 05 (2018-01-30)
arbitration ports as an example to describe how to modify the file. Modify the IPADDR
in this file and then save the file.
NOTICE
Parameter STARTMODE must be set to auto.
XXX@Linux:~# vi /etc/sysconfig/network/ifcfg-eth1
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='192.168.6.31/24'
MTU=''
NAME='82540EM Gigabit Ethernet Controller'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
XXX@Linux:~# vi /etc/sysconfig/network/ifcfg-eth2
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='192.168.7.31/24'
MTU=''
NAME='82540EM Gigabit Ethernet Controller'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
Check whether the service IP address configuration of the quorum server takes effect.
Enter the CLI of the quorum server, go to any directory, run the service network restart
command in any directory to enable the IP address configuration to take effect. Then run
the ifconfig command to check whether the configuration for eth1 and eth2 takes effect.
If the IP address that you configure is displayed in the command output, the
configuration takes effect.
XXX@Linux:~#ifconfig
eth1 Link encap:Ethernet
inet addr: 192.168.6.31
inet6 addr: fe80::a00:27ff:fe2e:fba6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
RX packets:43285954 errors:0 dropped:5051127 overruns:0 frame:0
TX packets:5819 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2916916679 (2781.7 Mb)
eth2 Link encap:Ethernet
inet addr: 192.168.7.31
inet6 addr: fe80::a00:27ff:fe2e:fba7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
RX packets:43285954 errors:0 dropped:5051127 overruns:0 frame:0
TX packets:5819 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2916916679 (2781.7 Mb)
Configure a port ID for the firewall of the quorum server.
Enter the CLI of the quorum server, go to any directory, run the vi /etc/sysconfig/
SuSEfirewall2 command in any directory to open the firewall configuration file and add
the port ID of FW_SERVICES_EXT_TCP to 30002.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HWaddr 08:00:27:45:7A:E2
Bcast:192.168.6.255
MTU:1500
TX bytes:720809 (703.9 Kb)
HWaddr 08:00:27:45:7A:EB
Bcast:192.168.7.255
MTU:1500
TX bytes:720809 (703.9 Kb)
4 Configuration
Mask:255.255.255.0
Metric:1
Mask:255.255.255.0
Metric:1
59