Huawei OceanStor 2000 V3 Series Features Manual page 60

OceanStor V3 Series
HyperMetro Feature Guide for Block
Step 4 (Optional) Check whether the arbitration software is installed successfully.
1.
2.
Step 5 Optional: When two quorum servers are configured at the quorum site in V300R006C10,
perform
----End
Follow-up Procedure
After the installation is successful, you can directly close the quorum server's CLI window.
If you want to uninstall the arbitration software, see
Software.
Issue 05 (2018-01-30)
Installing the quorum server.
Preparing...
1:QuorumServer
[Notice] No old configuration need to resume.
QuorumServer install success completed.
NOTE
quorumsvr is the default user account for the arbitration software installation. If you want to install the
arbitration software under another user account, enter the user name after Enter an administrator
account for the quorum server:[default: quorumsvr], for example, Enter an administrator
account for the quorum server:[default: quorumsvr]:User_test.
For security purpose, restrict the permissions of the non-root user. In this condition, to ensure that the
arbitration software is successfully installed, create a non-root user before installing the arbitration
software and ensure that the non-root user can obtain the permissions of the following commands by
running the sudo command: cat, ps, sh, useradd, groupadd, userdel, groupdel, usermod, passwd,
sed, rm, rpm, ls, chmod, chown, find, xargs, killall, mv, ln, and unzip. For example, run the sudo cat
xxx command. In the command, xxx indicates the name of a file in the system.
After the arbitration software is installed, it automatically restarts. Enter the CLI of the
quorum server, go to any directory, run the qsadmin command in any directory to open
the arbitration software. If the arbitration software page is displayed, the arbitration
software restarts successfully.
XXX@Linux:~# qsadmin
start main!
Waiting for connecting to server...
admin:/>
Enter the CLI of the quorum server, go to any directory, run the ps -elf |grep quo*
command to check whether the arbitration software is installed successfully. If ./bin/
quorum_serverd is displayed in the command output, the arbitration software is
installed successfully.
XXX@Linux:~# ps -elf |grep quo*
0 S testUser 7013
0 S testUser 7021 7013
0 S testUser 7232 6394
00:00:00 /bin/sh /opt/quorum_server/bin/quorum_server_monitor.sh
00:00:00 ./bin/quorum_serverd
00:00:00 grep quo*
Step 2 to Step 4 to install the arbitration software.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
########################################### [100%]
########################################### [100%]
1 0 80 0 - 3700 wait
0 80 0 - 22958 -
0 80 0 - 2452 pipe_w 22:57 pts/0
5.3.6 Uninstalling the Arbitration
3 Installation
22:56 ?
22:56 ?
52