Huawei OceanStor 2000 V3 Series Features Manual page 91

OceanStor V3 Series
HyperMetro Feature Guide for Block
l
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Step 3 Select the HyperMetro Pair tab.
The HyperMetro Pair management page is displayed.
Step 4 Click Create.
The Create HyperMetro Pair Wizard dialog box is displayed.
Step 5 Select HyperMetro Domain, Resource Type and Host Multipathing Software for the
HyperMetro and click Next.
Step 6 In Available Local Resources and Available Remote Resources, select local and remote
LUNs for which you want to configure the HyperMetro feature and click Add to Pairs.
Local and remote LUNs must have the same number of sectors.
Step 7 Click Next.
Step 8 Set the data synchronization properties for the HyperMetro.
parameters.
Issue 05 (2018-01-30)
This operation is only performed on the local storage system.
Data Protection >
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HyperMetro > HyperMetro Pair.
4 Configuration
Table 4-12 describes related
83