Deleting A Hypermetro Consistency Group - Huawei OceanStor 2000 V3 Series Features Manual

OceanStor V3 Series
HyperMetro Feature Guide for Block
The Remove HyperMetro Pair dialog box displayed.
Step 4 In Available HyperMetro Pairs, select the HyperMetro pair you want to remove, and click
Step 5 Confirm that you want to remove the HyperMetro pair.
1.
2.
3.
----End

5.4.9 Deleting a HyperMetro Consistency Group

You can delete a HyperMetro consistency group once you do not need it.
Prerequisites
All HyperMetro pairs of HyperMetro consistency group have been removed.
Context
Only consistency groups of HyperMetro pairs are deleted but not the HyperMetro pairs.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Consistency Group.
Step 3 Select the HyperMetro consistency group you want to delete, and click Delete.
The security alert dialog box is displayed.
Step 4 Optional: Select Only delete the configuration information about the local device if the
HyperMetro consistency group fails or the remote device is disconnected. based on site
requirements.
If you do not select this option, you cannot delete the HyperMetro domain when the local device is
disconnected from the remote device.
Step 5 Carefully read the contents of the dialog box. Then click the check box next to the statement I
have read and understand the consequences associated with performing this operation.
and click OK to confirm the information.
The Execution Result dialog box is displayed indicating that the operation succeeded.
Step 6 Click Close.
----End
Issue 05 (2018-01-30)
to move the HyperMetro pair to Selected HyperMetro Pairs, then click OK.
Confirm the information in the dialog box and select I have read and understood the
consequences associated with performing this operation.
Click OK.
The Execution Result dialog box is displayed.
Click Close.
Data Protection >
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HyperMetro > HyperMetro Pair > HyperMetro
5 Management
131