Huawei OceanStor 2000 V3 Series Features Manual page 106

OceanStor V3 Series
HyperMetro Feature Guide for Block
the function of using third-party multipathing software for initiators must be enabled on
Huawei storage.
This configuration must be performed on all initiators with HyperMetro enabled.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Provisioning > Host.
Step 3 In the lower left corner, select the initiator used for HyperMetro, click Modify.
The Modify Initiator dialog box is displayed.
Step 4 Modify the properties of the initiator.
You need to restart the host after modifying the host initiator information for the configuration to take effect.
Issue 05 (2018-01-30)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-6 lists related parameters.
4 Configuration
98