Huawei OceanStor 2000 V3 Series Features Manual page 93

OceanStor V3 Series
HyperMetro Feature Guide for Block
Parameter
Recovery Policy
Initial Synchronization
Step 9 Click Next.
Step 10 Optional: Add the HyperMetro pair into consistency group.
1.
2.
Issue 05 (2018-01-30)
NOTE
The Running Status of the consistency group you want to pause must be Paused.
Choose Select a consistency group and add HyperMetro pairs to it.
Choose the consistency group you want to add the HyperMetro pair, or click Create
HyperMetro Consistency Group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
A recovery policy
determines whether the
system automatically
synchronizes data after a
HyperMetro fault is
rectified.
l Automatic: The system
automatically
synchronizes data.
l Manual: The
synchronization
operation must be
performed manually.
Initial synchronization
method for data at local and
remote ends.
Table 4-13 describes related parameters.
4 Configuration
Example Value
[Value range]
Possible values are
Automatic and Manual.
[Default value]
Automatic
[Value range]
l Local and remote data is
inconsistent. After the
creation is complete,
manually synchronize
data.
l Data at the local and
remote ends is
consistent.
Synchronization is not
required after the
creation is complete.
l Local and remote data is
inconsistent. After the
creation is complete, data
is automatically
synchronized.
[Example]
Local and remote data is
inconsistent. After the
creation is complete, data is
automatically synchronized.
85