Configuration Preparations - Huawei OceanStor 2000 V3 Series Features Manual

OceanStor V3 Series
HyperMetro Feature Guide for Block
Configuration
Procedure
Configure
HyperMetro:
1. Check the
2. Add a remote
3. Add the quorum
4. Create a
5. Create a
6. Create a
Configure a
Multipathing Policy
for Host.

4.2 Configuration Preparations

This section describes prerequisites and documents that you must prepare before you
configure HyperMetro.
Prerequisites for configuring HyperMetro are as follows:
l
l
Issue 05 (2018-01-30)
Description
Describes how to check the
HyperMetro license, add a remote
device and quorum server, and create
a HyperMetro domain and
license file.
HyperMetro pair.
device.
server.
HyperMetro
domain.
HyperMetro pair.
HyperMetro
consistency
group.
This section describes how to
configure an UltraPath policy for
HyperMetro. For HyperMetro, the
UltraPath software is configured to
improve the I/O processing efficiency
and reduce the access latency.
All devices have been installed.
The IP/Fibre Channel network is working properly between the two data centers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration
Operation Location
1. Check the license file.
(This operation is
performed on both the
local and the peer
remote storage
systems.)
2. Add a remote device.
(This operation is only
performed on the local
storage system.)
3. Add the quorum server.
(This operation is
performed on both the
local and the peer
remote storage
systems.)
4. Create a HyperMetro
domain. (This operation
is only performed on
the local storage
system.)
5. Create a HyperMetro
pair. (This operation is
only performed on the
local storage system.)
6. Create a HyperMetro
consistency group.
(This operation is only
performed on the local
storage system.)
Host.
56