Huawei OceanStor 2000 V3 Series Features Manual page 42

OceanStor V3 Series
HyperMetro Feature Guide for Block
No.
6
7
8
Issue 05 (2018-01-30)
Item Requirement
Corrosive l Copper corrosion rate: less than 300 Åb/month per ANSIc/
Airborne
Contaminants
l Silver corrosion rate: less than 200 Åb/month per ANSIc/
l You are advised to ask a professional organization to
l The following is an example of initial evaluation for
Vibration and l Operating vibration
shock
l Non-operating vibration
l Non-operating shock
Air conditioner If the temperature in the room exceeds 35°C, you are
recommended to install air conditioners (which can be
restarted after power-off). Do not let the air conditioner blow
directly toward the devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ISAd-71.04 severity level G1.
ISAd-71.04 severity level G1.
monitor the corrosive airborne contaminants in the
equipment room.
environmental corrosion risks.
– Whether the equipment room is near any sulfurous gas
emission sources, for example, porcelain factories,
rubber plants, tire factories, chemical factories, sewage
plants, power stations, paper mills, smelters,
automobile factories, coal mines, electroplating
factories, food factories, and tanneries? If yes,
environmental corrosion risks may exist.
– Whether the equipment room is near the sea, saline,
sewer outlets, sewage treatment tanks, and industrial/
heating boilers? If yes, environmental corrosion risks
may exist.
– Whether the equipment room was decorated in the
latest six months? If yes, environmental corrosion risks
may exist.
– Whether batteries are stocked in the equipment room?
Whether the storage battery leaks? If yes,
environmental corrosion risks may exist.
– Whether the equipment room is closed tightly?
Whether the room windows and doors are always
closed? If no, environmental corrosion risks may exist.
5 Hz to 300 Hz: 1.5 m/s
cycles per axis; 5 Hz to 500 Hz: 0.27 Grms, 3 axes, 10 min
per axis
5 Hz to 20 Hz, PSD: 1.0 m
oct; 3 axes, 30 min per axis
Half sine, 6 ms, 300 m/s
direction
2
, 0.5 oct/min 3 axes, 1 sweep
2 3
/s ; 20 Hz to 200 Hz, –3 dB/
2
, 6 directions, 3 times per
3 Installation
34