Installing The Receiver Switch; Installing The Engine Switch; Installing The Stopper Assembly - Seagull Models Decathlon 60-85cc-3D Assembly Manual

DECATHLON 60-85cc-3D
10.
11.
Elevator servo arm .

INSTALLING THE RECEIVER SWITCH

Install the switch into the precut hole in
the side, in the fuselage.
1.
2.
16
Rudder servo arm.
3/32" Hole.
Trim and cut.
Instruction Manual.
3.

INSTALLING THE ENGINE SWITCH

1.
2.
INSTALLING THE STOPPER
ASSEMBLY
Using a modeling knife, carefully cut off
the rear portion of one of the 3 nylon
tubes leaving 1/2" protruding from the
rear of the stopper. This will be the fuel
pick up tube.
.
Switch.
Trim and cut.
Switch.