Installing The Spinner; Install Nail Hinge Elevator - Seagull Models Decathlon 60-85cc-3D Assembly Manual

31.
32.
33.
34.
Battery.

INSTALLING THE SPINNER

Install the spinner backplate, propeller
and spinner cone.
1.
The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
2.

INSTALL NAIL HINGE ELEVATOR

Test fit the hinges into the elevator, and
then the hinges into the tail. Ensure that
the hinge pockets line up, and that the
hinges move freely.
29