Press Cylinder Sideways; Wp 100H; Press The Table Height - Holzmann WP50H User Manual

14.1.3

Press cylinder sideways

The 4 screws holding the plate pressing cylinder open and the press cylinder position it centrally
over the workpiece. Following screws tighten.

14.2 WP 100H

14.2.1 Press cylinder sideways
Insert the handle (12) to the worm connecting
shaft (M1)
Turning the handle clockwise, and the ram moves
left (Direction A).
Turning the handle (12) anti-clockwise, and the
ram moves right (Direction B)
14.2.2

Press the table height

Insert the handle (12) to the worm shaft (W12)
Turning the handle (12) clockwise, the working bed will
lift (direction A)
Turing the handle (12) anti-clockwise, the working bed
be lowered (direction B)
Make the press table (19) to the correct height, then insert the safety pin (21). In the holes in
the frame and lock with snap rings (22) (Figs. 5 and 6)
Fig. 5
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Fig. 6
Dílenský lis / shop press WP 50H - WP 75H - WP 100
Strana 46