13.2 Mounting the transport dismantled parts
The workshop press is basically delivered fully assembled.
The workshop press comes in a wooden box wrapped in principle assembled.
For transport reasons, the mounting base, the winch, the pump construction group with oil pipes,
the pressure gauge will be fitted by the customer.
The machine must be installed only by qualified personnel and put into operation!
All relevant safety regulations must be strictly adhered to
Check before commissioning all screw connections and tighten them if necessary.
WP 50H Assembly
13.2.1
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Strana 40
Dílenský lis / shop press
WP 50H - WP 75H - WP 100