Pump Assembling Wp 50H; Pump Assembling Wp 75H; Pressure Gauge Assembling Wp 50 / Wp 75H; Dílenský Lis / Shop Press Wp 50H - Wp 75H - Wp - Holzmann WP50H User Manual

13.2.3 Pump assembling WP 50H

Move the pump assy (51) to the outside of the
post, use bolt (47) and washer (48) which dis-
mantled just now to twist tight on the right
connecting plate (34)

Pump assembling WP 75H

13.2.4
Pump assemble: attach the pump assy (57) to pump setting plate (49) by using three bolts
(51) and lock washer (50) and twist tight.
Oil hose 1 assemble: dismantle the plug from oil hose 1 (58) then assemble the o-ring(45), also
dismantle the plug from ram assy (37), connect the oil hose 1 (58) to ram assy (37) and twist
tight.
Oil hose 2 assemble: attach the o-ring (45) to gauge fitting (43), then put the oil hose

13.2.5 Pressure gauge assembling WP 50 / WP 75H

Assemble the nylon ring (42) to gauge fitting (43), then put the pressure gauge (41) and twist
tight. Remark: twist as tight as possible, otherwise it will be leak. Attach the gauge fitting to the
suitable upper cross beam and twist bolt (60), dismantle the plug screw of Junction rod (46) af-
ter adjust and tight the gauge direction. Attach the Junction rod (46) to the gauge fitting (43)
and twist tight
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Dílenský lis / shop press WP 50H - WP 75H - WP 100
Strana 42