Setting Parameters On The Vcn Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
----End

6.2.5 Setting Parameters on the VCN WebUI

Prerequisites
For details about the VCN hardware description and installation, see the "Hardware Guide" in
the corresponding VCN product documentation. For details about the VCN configuration, see
Configuration Guide.
Context
A default IP address has been configured for the VCN before delivery. Modify the IP address
based on the actual network plan.
Procedure
Step 1 Modify the IP address for the VCN.
1.
Issue 05 (2019-09-16)
Figure 6-22 Setting the alarm linkage policy
The version number is subject to the Quick Start delivered with the VCN. The description and link in
this document are for reference only.
Configure the PC IP address and the VCN IP address in the same network segment.
Enter the OMU Portal address (the default address for VCN is
https://192.168.1.100:8443; the default address for VCN540 is
https://192.168.2.101:8443) in the address bar of the Internet Explorer and press the
Enter button.
The OMU Portal supports Internet Explorer 8.0 and later versions.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
121