Table of Contents
Advertisement
30
www.aeg.com
place during baking. Use a solid
ingredient to achieve that. Use the
rim of the baking dish to support the
silicone handle of the core
temperature sensor. The tip of the
core temperature sensor should not
touch the bottom of a baking dish.
4. Cover the core temperature sensor
with the remaining ingredients.
5. Put the plug of the core temperature
sensor into the socket at the front of
the oven.
The display shows the core temperature
sensor symbol.
6. Set the core temperature.
7. Set a heating function and, if
necessary, the oven temperature.
When the dish reaches the set
temperature, the signal sounds. The
oven turns off automatically.
8. Touch a sensor field to stop the
signal.
9. Remove the core temperature sensor
plug from the socket and remove the
dish from the oven.
WARNING!
There is a risk of burns as the
core temperature sensor
becomes hot. Be careful
when you unplug it and
remove it from the food.
Changing the core
temperature
To change the core temperature, touch
the temperature on the display.
A
B
C
Menu
220°
1h 14m
64°
Stop
G
F
A. Return to menu
B. How long the function is active
C. Current set heating function
D. Current set temperature
E. Current temperature in the oven
F. Stop
G. Current set temperature for the core
temperature sensor
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray/ Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
D
E
100°
Advertisement
Table of Contents
