Electromagnetic Compatibility - Arjohuntleigh Enterprise E5000X Instructions For Use Manual

9. Electromagnetic Compatibility

The bed is intended for use in the electromagnetic environment specified in the tables below. The customer or
the user of the bed should ensure that it is used in such an environment. Failing to ensure that these tables
are properly followed may result in the product not working properly.
Portable and mobile frequency communication equipment may affect the normal use of the E5000X, please
use E5000X under the recommended electromagnetic environment.
The use of non-approved accessories may result in increased emissions
or reduced immunity of the equipment. A list of approved accessories is
included in the product instructions for use. See chapter 6 – Accessories
and Cables.
When this equipment is used adjacent to other electronic devices, the
user should observe the equipment to verify normal operation.
Guidance and manufacturer's declaration – electromagnetic emissions
The bed is intended for use in the electromagnetic environment specified below. The customer
or the user of the bed should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
746-577-UK-6
Compliance Electromagnetic environment - guidance
The bed uses RF energy only for its internal function.
Group 1 Therefore its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class B
The bed is suitable for use in all establishments, including
Class A domestic establishments and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Complies
Caution
56