Components - The Handy THTS175 Instruction Manual

COMPONENTS

This product must be assembled correctly before use. Carefully remove the product and any accessories from
the carton. Inspect the product carefully to make sure there are no breakages or damage occurred during
shipping. Do not discard the packing material and carton until you have carefully inspected and satisfactorily
operated the product.
Take all parts out of the shipping crate and inspect components to ensure there are no missing pieces before
starting to assemble the spreader.
If you require assistance with regards to the contents or operation of the machine, please contact us:
TEL: 01793 333212
EMAIL: customerservice@handydistribution.co.uk
(MON – FRI 8.00AM TO 5.30PM EXCL. BANK HOLIDAYS)
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed
Do not attempt to modify this product or create accessories not recommended for use with this product.
Any such alteration or modification is misuse and could result in a hazardous condition leading to possible
Read and follow all instructions for assembly and operation. Failure to properly assemble this equipment
could result in serious injury to the user or bystanders, or cause equipment damage.
Hex Bolt M6x20
x2
Nylock Nut Nylock Nut
M6 x13 M8 x3
R-Clip Ø3x75
x9
this warning could result in serious personal injury.
serious personal injury.
Hex Bolt M6x35
Hex Bolt M6x45
X1
Large Flat
Washer Ø6 x9
Wheel Spacer
x2
WARNING
Hex Bolt M6x50
X3
Flat
Washer Ø8 x1
Drive Pin Ø6x45
x1
Hex Bolt M8x45
x7
X2
Cotter Pin
Flat Washer
Ø16 x6 Ø4x40 x2
Drive Pin Ø9x60
x1