The Handy THTS175 Instruction Manual page 9

STEP 2
In the following order put flat washer Ø16, wheel spacer, second flat washer Ø16, Tire, third flat washer Ø16
on the end of wheel axle. Insert the cotter pin Ø4x40 into the small hole on the axle and bend to secure.
Cotter Pin Ø4x40
Wheel & Tyre
Assembly
Flat Washer
Wheel Spacer
Ø16
STEP 3
Insert the hex bolt M6x50 after aligning the hole on the flat end of hitch tongue (stay on top) with the one at
the middle of crossover tube. Connect using a large flat washer Ø6 and nylon lock nut M6 and don't screw it up
moderately.
Hex Bolt
M6x50
Hitch
Arm
Large Flat
Washer Ø6
Nylock Nut
M6