The Handy THTS175 Instruction Manual page 12

STEP 8
Install one flat washer Ø8 on the end of connection rod and insert into the hole on the rod base and secure
using a nylon lock nut M8.
Adjust
Connection
Rod
Flat Washer Ø8
Nylock Nut M8
STEP 9
Attach the support rods to the hopper using the hex bolts M6x20, big flat washers Ø6 and nylon lock nuts M6.
Hex Bolt M6x20
Support Rod
Big Flat
Nylock
Washer Ø6
Nut M6
STEP 10
Insert the hopper screen into the bottom of the hopper.
Hopper Screen