Phase and Delay
• Phase
• Delay
Preshoot and Overshoot
• Preshoot
• +Overshoot
• –Overshoot
To Perform Automatic Measurements
You can use automatic measurements for both channels. Up to four
measurement results can be displayed simultaneously at the dedicated
measurement line. To turn on the automatic measurement, follow the
instructions below:
1 Press
2 Notice there are four measurement files to be selected among the 22
3 Turn the rotary switch to select the automatic measurement type.
4 Press the rotary switch to set the selected automatic measurement type.
5 Repeat the same steps to select measurements for the other three
6 To turn off the measurement file, turn the rotary switch for the
Agilent U1602A/U1604A User's and Service Guide
to access Measure menu.
automatic measurement types. Press the respective softkey to activate
the corresponding measurement file.
Measurement results for both channels are displayed at the
measurement line concurrently.
measurement files.
respective file until you see "Off" in the list. Press the rotary switch to
set the off condition.
Using the Scope Functions
3
87