To Remove Battery Pack; Figure 8-3 Remove Battery Cover Screw - Agilent Technologies U1602A User's And Service Manual

General Disassemble 8

To remove battery pack

To avoid electric shock, ensure you disconnect all input and power cord to the
WARN IN G
instrument. Do not operate the instrument until the battery covers are covered
securely.
There are two alternative ways to remove battery pack from the
instrument:
• without stand installed
• with stand installed (for battery replacement purpose)
To remove battery pack without stand installed, perform the instructions
below and followed by the battery removing procedures:
• To remove stand
1 Remove two screw as pointed in Figure 8- 3.

Figure 8-3 Remove battery cover screw

Agilent U1602A/U1604A User's and Service Guide 185