Agilent Technologies U1602A User's And Service Manual page 47

1 Power Switch Press and hold power switch
2 Softkeys The function of each key varies with the menus shown on the
3 Scope Main function key to access channel 1 and channel 2 waveform
4 Meter Main function key to switch to multimeter mode. This meter
5 Logger Main function key to consolidate data point for data logging
6 User Main function key to access Display, Acquire, Math and Utility
• Display mode allows you to set the type, contrast and graticule setting
• Acquire mode lets you set the signal acquisition to Normal, Average or
• Math mode provides the Dual Waveform Math functions to multiply and
Agilent U1602A/U1604A User's and Service Guide
instrument ON or OFF.
display. The four softkeys are located below the LCD display.
settings. Under Scope mode, you can set the waveform display to
delayed section, whereby you can select XY and YT time base. By
turning the rotary switch, you can change the waveform's vertical
position on the display. You can also set the acquisition window relative
to the trigger point and trigger time reference point on this menu. In
addition to this, you can pan and zoom into the virtual waveform by
turning the zoom window horizontally.
mode provides access to Voltmeter, Ohmmeter and Auxiliary meter
sub- menu. Use the softkey to select and access the various multimeter
functions that work in auto- range mode.
purposes. This data logging function is available for all multimeter
functions.
menus.
for the display background. You can persist the captured waveform
without erasing the previous waveform acquisitions.
Peak modes.
subtract waveforms. FFT (Fast Fourier Transform) function is available
for U1604A.
Front Panel and Displays Overview
button to power the
2
47