Agilent Technologies U1602A User's And Service Manual page 25

Agilent U1602A/U1604A User's and Service Guide
Figure 3-41 The <Load> display indicates that a configuration setup file has
been saved into Setup 1 and you can press F1 to retrieve the setup
from internal memory.
Figure 3-42 The <Save> display indicates no waveform is being saved, you can
press F1 to save the waveform into Waveform 1.
Figure 3-43 The <Load> display indicates the a waveform file is saved into
Waveform 1 and you can press F1 to retrieve the waveform from
internal memory. This function is useful for waveform comparison.
109
Figure 3-44 The <None> display indicates that no setup file is saved. The
<Erase> in Setup 1 shows that you can erase the setup file from the
internal memory.
Figure 3-45 The <None> display indicates that no waveform is being saved. The
<Erase> in Waveform 1 shows that you can erase the waveform from
the internal memory.
Figure 3-46 Restore factory setup in Save/Load Setup menu.
Figure 3-47 The instrument requests confirmation to restore factory default
setting.
Figure 3-48 Connect a USB flash memory to save or download waveforms
to/from the external memory device.
Figure 3-49 Load a waveform from a USB flash memory device
Figure 3-50 Run and Stop modes
Figure 3-51 Auto-power off control
Figure 3-52 Message display during low battery condition
Figure 4-1 Multimeter display
Figure 4-2 DC measurement display
Figure 4-3 Resistance measurement
Figure 4-4 Continuity test shorted with audible beeper sound.
Figure 4-5 Diode in forward bias condition
Figure 4-6 Diode in open condition
Figure 4-7 Capacitance measurement
Figure 4-8 Temperature measurement in degrees Celsius (°C) together with
degree Fahrenheit (°F) display.
Figure 4-9 Current measurement
Figure 4-10 Humidity measurement
108
110
111
113
118
119
124
125
127
130
131
135
136
109
113
114
116
121
128
130
133
Figures
25