Accessories - Xavant STIMPOD NMS 410 Manual

1.2) Accessories

WARNING: Use of cables or other accessories other than those supplied with the STIMPOD may result in serious injury.
NOTE: Electrodes and Nerve Locating needles are not included in this package.
CAUTION: A sterile wipe should be applied to the Nerve Mapping Probe prior to use.
Nerve Mapping/ Nerve Locating Cable (XT-41014):
•
This cable is used to activate the Nerve Mapping/ Nerve Locating mode on the STIMPOD.
•
The red (anode) connector is designed to clip on to a standard ECG electrode.
•
The ergonomically designed cutaneous Nerve Mapping Probe presents the user with a simple and reliable
Nerve Mapping solution.
•
The 2mm needle connector will accommodate various makes of needles.
NMT Monitoring Cable (NMS 450X) (XT-45025):
•
This cable is used to activate the NMT mode on the STIMPOD.
•
The red (anode) and black (cathode) connectors are designed to clip onto the Xavant NMT electrode (XT-45008)
or onto a standard ECG electrode.
•
The accelerometer is designed to attach to the contracted appendage (in the case of the ulnar nerve, this will
be the thumb).
NMT Electrode (XT-45008):
•
The colour coded connections indicate the polarity for the NMT cable connections
•
The larger surface area of the red (anode) electrode reduces the current density of the anode and prevents
hyperpolarization
•
The proprietary gel and gel interface was specifically designed for transmission of large currents.
9