Setting Up Device Defaults - Xavant STIMPOD NMS 410 Manual

4

Setting up Device Defaults

The setup menu allows the user to customize device parameters. Access the Setup Menu
by pressing and holding the menu button. To exit the menu, the menu button may be
pressed again. A block at the top of each menu indicates which menu is currently active.
The menu is controlled using the menu button, the enter button and the Q-wheel. Two
blocks at the bottom of the screen indicates what action will occur when a button is
pressed, the block bottom left corresponds to the menu button and the block bottom
right with the enter button.
In general, the menu button will cause the menu to go back to the previous state or
cancel the current action, while the enter button will act on the current menu item (select
/ accept / toggle). Clockwise rotation on the Q-wheel will generally mean next (menu
item / option) or increase (selected value), while counter clockwise will generally mean
previous (menu item / option) or decrease (selected value).
26