B) Adjusting The Current In Map Mode - Xavant STIMPOD NMS 410 Manual

Default Current and Pulse Width Range:
As shown in table 1 in section 4.4 circle the Wheel to select the
predetermined current and pulse width positions sequentially.
When using the Nerve Mapping Probe (NMS 410/450X):
Current Setting
Adjust using wheel
Pulse Width Setting
Adjust using Menu / Pulse width button

2.1b) Adjusting the Current in MAP mode

Current Range: 0 - 20mA adjustable in 1mA increments.
Circle the Wheel to adjust current.
1
2
1
NOTE: Because the 20 definable positions include both current and pulse width settings,
pulse width cannot be adjusted independently in this mode. This is indicated on the
screen by the fact that pulse width is not highlighted.
NOTE: The STIMPOD will automatically default to the Nerve Mapping current range
(0-20mA) and display the ' MAP ' indicator.
NMS 450X NMS 450X
Warning:
Notifies the user of a discrepancy
3
between current setting and average current
of actual stimulus.
If sound is enabled:
STIMPOD will beep
4
every time that a stimulus was delivered. The
pitch of the sound will follow the current
intensity level.
Average current of actual stimulus
5
Proximity Indicator
6
Stimulating Frequency Setting
7
Adjust using Enter / Hz width button
17