Xavant STIMPOD NMS450 Quick Start Manual

Table of Contents

Download this manual

Patient is sedated and relaxed

Press and hold the play button

to enable continuous TOF mode.

The repeat timer (4) will indicate

the time left before the next

stimulation sequence starts.

Hold for 2 sec

for deep neuromuscular blocks by

pressing the mode button.

Monitor the patient during

the recovery phase with the

continuous TOF mode.

Ensure that the TOF Ratio is

equal or more than 90% to

eliminate residual curarization.

Q U I C K S T A R T G U I D E

S T I M P O D N M S 4 5 0

Table of Contents

Do you have a question about the STIMPOD NMS450 and is the answer not in the manual?

Page 1 Patient is sedated and relaxed Q U I C K S T A R T G U I D E Press and hold the play button to enable continuous TOF mode. The repeat timer (4) will indicate the time left before the next stimulation sequence starts.
Page 2 When the patient is sedated and unrelaxed Adjust the current (if needed) Turn the device on by with the adjustment wheel. pressing the power button Press the ENTER button to confirm the new current. This is what will be displayed Place the NMBA electrode on Connect the ECG clips to the the patient’s ulnar nerve.