Nmt Settings - Xavant STIMPOD NMS 410 Manual

In scroll mode, the wheel can freely change the cursor position. Any character can be
selected and then changed in edit mode by pressing the enter button.

4.3) NMT Settings

This menu contains the repeat and refractory timers for TOF, DB and PTC, the active NMT
modes and whether facial mode is activated. The active modes and timers are grouped
in expandable menu items. To view the contents of an expandable menu item, press the
enter button while an expandable item is selected. The contents can then be hidden by
pressing the enter button again.
step 1
step 2
28
NMS 450X NMS 450X
NMS 450X NMS 450X
Timers: The timer items are changed in a two-step process, changing the number of
minutes first and then the number of seconds. Use the wheel to navigate to the item
which should be changed, then press the enter key to start editing.
step 1
step 2
In step 1, the wheel will change the number of minutes. The enter button will accept the
value and continue to step 2, while the menu button will revert to the previous timer value
and cancel editing. In step 2, the wheel will change the number of seconds. The enter
button will accept the timer value and conclude editing. The menu button will return the
process to step 1.
Active modes: This can be used to limit the amount of NMT modes which are available
during operation to limit the amount of button presses necessary to get to the required
mode. Pressing the enter button will toggle the item between active and inactive. The
available modes include TOF, DB, PTC, TWI, TET, SMC and Auto.
NMS 450X NMS 450X
NMS 450X NMS 450X