Sewing Reverse/Reinforcement Stitches; Combining Stitch Patterns - Brother LB5000S Operation Manual

d Slowly depress the foot controller to start sewing.
Memo
• The speed that is set using the sewing speed controller
will be the foot controller's maximum sewing speed.
Release the foot controller to stop the machine.
e

Sewing reverse/reinforcement stitches

Reverse/reinforcement stitches are generally necessary at the
beginning and end of sewing. Depending on the selected
stitch, reverse or reinforcement stitches are sewn while
(Reverse/Reinforcement stitch button) is kept pressed. With
reinforcement stitches, 3 to 5 stitches are sewn at the same
place. With reverse stitches, the stitching is sewn in the
opposite direction.
Memo
• When any of the following stitches is selected, pressing
(Reverse/Reinforcement stitch button) will sew
reverse stitches.
No. 1-01 1-03
Stitch
When any other stitch is selected, pressing
(Reverse/Reinforcement stitch button) will sew
reinforcement stitches.
a
1 Reverse stitch
2 Reinforcement stitch
3
(Reverse/Reinforcement stitch button)
1-08
c

Combining Stitch Patterns

Stitch patterns from the following categories can be
combined.
Example:
a Press .
b Select the following stitch pattern.
c Press .
→ The display returns to the stitch selection screen.
d Press .
e Select the following stitch pattern.
f If you want to sew the stitch pattern continuously,
press to display editing screen, and then press
.
Sewing
2
27