Sewing Overcasting Stitches Using Zigzag Foot "J; Sewing Overcasting Stitches Using The Side Cutter (Sold Separately With Some Models) - Brother Innov-is NV1100 Operation Manual

Overcasting Stitches
Sewing overcasting stitches using zigzag foot
"J"
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Stitch name Stitch
Zigzag stitch
Zigzag stitch (Right)
2 steps elastic zigzag
stitch
3 steps elastic zigzag
stitch
Overcasting stitch
Single diamond
overcast stitch
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to "Basic operations" section.
Attach zigzag foot "J".
a
b Select a stitch.
c Sew along the edge of the fabric with the needle
dropping off the edge at the right.
a
1 Needle drop point
S-12
Stitch number
* *
1-09 09 08
1-11 11 10
1-13 13 11
* *
1-14 14 12
1-18 18 16
J
1-19 19 17
1-20 20 18
1-21 21 19
1-22 22 –
1-23 23 –
J
1 Needle drop point
Sewing overcasting stitches using the side
cutter (sold separately with some models)
Using the side cutter, seam allowances can be finished
while the edge of the fabric is cut off. Five utility stitches
can be used to sew overcasting stitches with the side
cutter.
• Using the table below, refer to "Using the utility
stitch tables in the "Sewing" section" in the "Basic
operations" section.
Note
• Thread the needle manually when using the side
cutter, or only attach the side cutter after
threading the needle using the needle threader.
Stitch name Stitch
With side cutter
Side cutter
1
Stitch number
1-24 24 20
1-25 25 21
1-26 26 22 S
1-27 27 23
1-28 28 24