Section 1 - Important Safeguards - Omni Bead Ruptor 24 User Manual

SECTION 1 — IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
SAVE THIS USER MANUAL
The Bead Ruptor 24 has been engineered for maximum functionality as well as safety; however, basic safety
precautions and common sense must always be demonstrated when using any electrical product. Do not
attempt to modify any part of the Bead Ruptor 24. If you experience problems with or have questions about
your Bead Ruptor 24, contact your authorized dealer or call Omni at 1-800-776-4431 or 770-421-0058.
WARNING!
• DO NOT allow the machine to be submerged in any liquid.
• DO NOT
use in any setting other than an indoor laboratory.
• DO NOT
plug power cord into an incorrect outlet.
• Keep this product away from heated surfaces.
To reduce the risk of burns, electrocution, fire, or injury:
• Use this product only for its intended purpose as described in this booklet. Do not use attachments not
recommended by the manufacturer.
• DO NOT
operate the product if it is damaged in any way.
RISK OF ELECTRIC SHOCK:
Although this equipment is fully insulated and grounded, it is important for all users to be aware of the
potential hazard of using liquids close to a power supply. If any liquids are spilled, immediately discon-
nect the instrument from the main power supply (remove the power cord from the AC power input on
the rear panel) and clean the equipment and the surrounding area. DO NOT reconnect the
equipment until it has been fully inspected.
4