Section 1. Important Safeguards - Omni SONIC RUPTOR 400 User Manual

4

SECTION 1. IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING
SAVE THIS USER MANUAL
The Sonic Ruptor 400 has been engineered for maximum functionality
as well as safety; however, basic safety precautions and common sense
must always be demonstrated when using any electrical product. Do
not attempt to modify any part of the Sonic Ruptor 400 .
If you experience problems with or have questions about your
Sonic Ruptor 400, contact your authorized dealer or
call Omni at 1-800-776-4431 or 770-421-0058.
WARNING
-DO NOT allow the machine to be submerged in any liquid.
-DO NOT use in any setting other than an indoor laboratory.
-DO NOT plug power cord into an incorrect outlet.
-Keep this product away from heated surfaces.
To reduce the risk of burns, electrocution, fire, or injury:
-Use this product only for its intended purpose as described in this
booklet. Do not use attachments not recommended by the
manufacturer.
-DO NOT operate the product if the control unit, cord or plug are
damaged in any way.
-An extension cord should not be used unless absolutely necessary.
RISK OF ELECTRIC SHOCK: Although this equipment is
fully insulated and grounded, it is important for all users to be
aware of the potential hazard of using liquids close to a power
supply. If any liquids are spilled, immediately disconnect the
instrument from the main power supply (remove the power
cord from the AC power input on the rear panel) and clean the
equipment and the surrounding area. DO NOT reconnect the
equipment until it has been fully inspected.
This is not a dual voltage unit. Please make sure the voltage showing on
the rear panel corresponds to your location