Section 2 - Unpacking The Bead Ruptor - Omni Bead Ruptor 24 User Manual

SECTION 2 — UNPACKING THE BEAD RUPTOR 24
2.1 UNPACKING THE BEAD RUPTOR 24
CAUTION:
DO NOT lift the Bead Ruptor 24 by holding the lid. It must be lifted by gripping the sides of the
unit and holding it from the bottom.
1. Place the crate on a level floor surface.
2. Using a screwdriver or power drill, remove the 16 screws from the bottom edge of the crate.
3. Lift the lid from the crate.
4. Lift and remove the inner cardboard box
5. Unscrew the two external knob screws from the back of the unit to release from the support plate.
6. Slide the Bead Ruptor away from the knob screw holes.
7. Lift the unit up and off of the crate bottom. DO NOT LIFT THE UNIT BY HOLDING THE LID.
8. Place the Bead Ruptor on a clean, horizontal and stable surface and remove the plastic bag
1.
4.
PLEASE NOTE: Do not discard the crate & packaging foam. This packaging must be used in the event the
Omni Bead Ruptor 24 needs to be returned to Omni for any reason.
SHIPPING THE BEAD RUPTOR IN ANY OTHER PACKAGING WILL VOID ALL WARRANTIES.
2.
5.
3.
5