Storage; Service; Decontamination Requirement - Omni Bead Ruptor 24 User Manual

Hide thumbs Also See for Bead Ruptor 24:

Table of Contents

SECTION 8 — TRANSPORT, STORAGE & SERVICE

8.2 STORAGE

The unit can be used in a cold room, but it must be stored in a dry area at a temperature ranging from

0° C/32° F to 50° C/122° F

It is recommended that the speed of the Bead Ruptor 24 be calibrated annually to ensure maximum

operation. For this or any other product servicing please contact Omni International at 800.776.4431.

Should an instrument or component that has been used with radioactive or pathogenic material require

factory or field service, comply with the following procedure to ensure the safety of service personnel:

Clean the parts to be serviced of all encrusted material and decontaminate them. There must be no radio-

activity detectable by survey equipment. Obtain a Decontamination Certificate from Omni International.

Complete the certificate and attach to the instrument or parts being returned.

If no Decontamination Certificate is attached, and a potential radioactive or biological hazard is detected or

suspected by Omni International, the equipment will not be serviced until proper decontamination and cer-

tification is complete. The sender will be contacted for instructions as to the disposition of the equipment.

Disposition costs will be borne by the sender.

WARNING:

It is a violation of federal law to transport biologically hazardous or radioactive materials without

proper packaging, labeling, and appropriate warnings.

Please visit the web address below to register

your new Bead Ruptor. You will also be asked

to provide us with information about

your research. In return, we'll send you

a Starbucks gift card!

www.omni-inc.com/warranty

Table of Contents

Show Quick Links

Table of Contents