Section 3 - Configuration
Username:
Enter the username/account name provided by your ISP.
Password:
Enter the password provided by your ISP.
Verify Password:
Re-type your password in this field.
Service Name:
(Optional) Fill in if provided by your ISP.
IP Address:
Fill in if provided by your ISP. If not, keep the default value.
Primary DNS
(Optional) Fill in if provided by your ISP. If not, keep the default
Server:
value.
Secondary DNS
(Optional) Fill in if provided by your ISP. If not, keep the default
Server:
value.
MAC Address:
The default MAC address is set to the WAN port's physical interface
MAC address on the router. It is not recommended that you
change the default MAC address unless required by your ISP. You
can use the Clone button to replace the WAN port's MAC address
with the MAC address of your PC.
Maximum Idle
The amount of time of inactivity before disconnecting an
Time:
established PPPoE session. Set it to zero or enable auto-reconnect
to disable this feature.
MTU:
You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
D-Link DWR-118 User Manual
PPPoE (Username / Password)
12