Cut-Out Dimensions; Flush Installation; Surface Mounting - bora PKT11 Operating And Installation Instructions

5.4

Cut-out dimensions

INFO All dimensions are shown from the front edge of
the front cover.
Worktop overhang
x ≥60
( ≥74 )
Fig. 5.2 Worktop overhang
Please note the worktop overhang x when creating the
X X
worktop cut-out. Applicable to flush installation and

surface mounting.

5.4.1 Flush installation

A ±2
B ±2
Fig. 5.3 Cut-out dimensions for flush installation
Fig. 5.4 Groove dimensions for flush installation
www.bora.com
14
14
Cut-out dimensions when installing cooktops or cooktops
and the cooktop extractor next to each other:
Cooktops/cooktop extractor
1/0
1/1
2/1
3/2
4/2
Tab. 5.2 Cut-out dimensions for flush installation of appliance
combinations
5.4.2 Surface mounting
B ±2
Fig. 5.5 Cut-out dimensions for surface mounting
Fig. 5.6 Surface mounting cut-out
Installation
A in mm B in mm
374 346
485 457
856 828
1338 1310
1709 1681
12
15
EN