Table of Contents
Advertisement
PKA3 mit Flachschalldämpfer USDF, Flachkanalverbinder
EFV und Übergangsstück gerade EFRG (Insel):
min. 810*
min. 742
5.4.2 Minimum installation dimensions
(standard set-up)
min. 74
≥810
max. 562
≥890
Fig. 5.2
Minimum installation dimensions for standard set-up
PKA3 mit Rundschalldämpfer USDR50 und Rundkanal-
of PKA3/PKA3AB
verbinder ERV (Insel):
min. 810*
min. 74
max. 545
Fig. 5.3
Appliance installation dimensions for standard set-up
of PKA3/PKA3AB with round silencer USDR50
XX
B O R A L Ü F T U N G S F I B E L
www.bora.com
≥900
120
180
33
93
219*
151*
810
760
220
110
219*
151*
PKA3 mit Flachschalldämpfer USDF, Flachkanalverbinder
EFV und Übergangsstück Versatz EFRV110 (Zeile):
min. 700*
682
5.4.3 Worktop and kitchen units
min. 74
Create the worktop cut-out taking into account the specified
X
X
cut-out dimensions.
Make sure that the cut surfaces of the worktops are properly
X
X
sealed.
Comply with the instructions of the worktop manufacturer.
X
X
Cross bars on the kitchen unit in the area of the worktop cut-
O
X
out may need to be removed.
No false floor is necessary below the cooktop. If cable
max. 562
O
X
protection (false floor) is planned, the following must be taken
into account:
max. 430
it must be fitted in such a way that it can be removed for
O
X
maintenance work;
to ensure sufficient cooktop ventilation, a minimum
O
X
distance of 15 mm to the bottom edge of the cooktop is
to be observed.
The drawers and/or shelves in the floor unit must be
O
X
removable.
For correct installation, the drawers of the floor unit must be
O
X
shortened depending on the installation situation.
5.5
Cut-out dimensions
PKAS3 mit Ecotube Flachkanal:
i
All dimensions are shown from the front edge of the front
min. 700
cover.
691
Worktop overhang
min. 74
x
≥60
( ≥74 )
max. 580
592
Fig. 5.4
Worktop overhang
Please note the worktop overhang x when creating the
X
X
worktop cut-out. Applies to flush installation and surface
mounting.
i
In the case of cooktop extractor PKA3/PKA3AB
combined with straight duct piece PKA1FEV, flush
installation is also possible in a worktop with a depth
≥ 650 mm.
Installation
120
252
110
170
389*
14
58
120
min. 328
min. 455
EN
15
Advertisement
Table of Contents
