Cut-Out Dimensions; Preparing The Worktop - bora PT11UMEN-000 Operating And Installation Instructions

Installation
EN
5.4

Cut-out dimensions

Preparing the worktop

Create the worktop cut-out taking into account the
X X
specified cut-out dimensions.
Make sure that the cutting surfaces of the
X X
worktops are properly sealed.
Comply with the instructions of the
X X
worktop manufacturer.
Flush installation
Fig. 5.2 Flush installation
Fig. 5.3 Dimension of groove for flush installation
INFO If the induction glass ceramic wok is used,
the groove dimensions must be increased to
7 mm for flush installation.
12
A
B
14
Surface installation
B
Fig. 5.4 Surface installation
Fig. 5.5 Surface mounting cut
Cut-out dimensions when installing cooktops or cooktops
and the cooktop extractor next to each other:
Cooktops / cooktop extractor
1/0
2/0
3/0
1/1
2/1
3/2
4/2
Tab. 5.2: Cut-out dimensions
12
A in mm B in mm
374 346
745 717
1116 1088
485 457
856 828
1338 1310
1709 1681
www.bora.com