Stainless steel grill with 2 cooking zones (32 pages)
Summary of Contents for bora PKT11
Page 1
Operating and installation instructions PKT11 BORA Pro Tepan stainless steel grill with 2 cooking zones PKT11UMEN-004 1041661 www.bora.com...
Page 2
Please accept our apologies in this eventuality. An updated version can be requested from the BORA Service Team. Subject to printing errors and mistakes.
INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH - hereinafter referred to as BORA - do not assume any liability for damage Target group arising from non-adherence to these documents...
Caution Indicates a potentially hazardous situation which could lead to slight or minor injuries if ignored. — Caution Indicates a situation which could result in material damage if ignored. Tab. 1.2 Meaning of warning symbols and signal words www.bora.com...
Make sure contact with hot cooking surfaces is not possible. Do not place any objects on the operating panel or the cooktop extractor air inlet nozzle. Switch off the appliance after use. Keep pets away from the appliance. www.bora.com...
Never touch the cooktop when it is Always keep an eye on pans while hot. cooking. Keep children away from the Short cooking sessions must be cooktop when it is hot or ensure constantly monitored. they are supervised at all times. www.bora.com...
When cleaning, only use non-abrasive from the mains with a contact detergents to prevent scratching and abrasion opening width of at least 3 mm (LS on the surface. switch and automatic circuit breakers, fuses, contactor). www.bora.com...
INFO BORA Holding GmbH, BORA Vertriebs GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH do Safety instructions – spare parts not assume any liability for damage arising from non-adherence to the WARNING! safety and warning information.
295 x 230 mm 2400 W Temperature control range 70–250° C Tab. 3.1 Technical data Device dimensions control knob Fig. 3.2 PKT11 Device dimensions aerial view 10-40 29,5 Fig. 3.3 PKT11 Device dimensions front view 18,5 Fig. 3.1 Device dimensions control knob Fig.
(at the back) Control knob for the rear grilling zone Control knob for the front grilling zone Fig. 4.4 Control knob display elements Display functions Power display Front grilling zone display Mode or operating mode display Rear grilling zone display www.bora.com...
The two grilling zones can be operated as a connected mixed display. grilling zone at the same power level. appears on the display. The bridging function is suitable for heating food in a roaster. www.bora.com...
4.4.4 Childproofing feature The childproofing feature prevents the cooktop from being switched on accidentally. appears on the control knob display. The childproofing feature can only be activated when all the cooking zones are switched off (see the Operation section). www.bora.com...
If there are any missing or damaged parts, please be taken into account: notify BORA After Sales Service immediately. It must be fitted in such a way that it can be Do not under any circumstances install parts which are removed for maintenance work.
5.5.1 Installing the control knob in the floor Slot the knob ring [1] onto the control knob [3]. unit front panel INFO Pre-drill the bore holes to prevent tearing out the fixed front panel. Fig. 5.7 Installed control knob and cooktop www.bora.com...
INFO If installation is rotated by 180°, then the connections for the control knobs and the extraction system are at the front. INFO Cables of sufficient length are provided. www.bora.com...
Page 19
[1]. Fig. 5.18 Control knob connection at the rear of the cooktop Connection of the front cooking zone control knob (zone 1) Connection of the automatic extraction system Connection of the rear cooking zone control knob (zone 2) www.bora.com...
Put the cooktop into operation (see the Operation chapter). INFO The power connection may only be established by Check that all the functions are working correctly. certified specialists. The specialist also assumes responsibility for the proper installation and commissioning. www.bora.com...
Once you have confirmed menu option , you can set Tab. 5.8 Installation direction the volume of the warning beep. INFO For installation rotated by 180°, the setting C 2 1 correctly assigns the correct cooking zones inside the control knob display. www.bora.com...
, you can permanently deactivate the pause function. Setting Pause function available/deactivated Pause function activated Factory setting C 90 Pause function deactivated C 9 1 Pause function with power level display activated C 92 Tab. 5.11 Availability of the pause function www.bora.com...
There are 9 power levels, one power setting and several functions available for each grilling zone. Fig. 6.2 Switching on the grilling zone Turn the selector ring from the 12 o’clock position to a power level. www.bora.com...
INFO If the bridging function is active, the temperature Fig. 6.3 Selector ring position for the low power levels is only displayed on the right control knob. (and the cleaning function) www.bora.com...
INFO Only start cleaning the grilling zones once the optimum cleaning temperature has been reached (see also the Cleaning section). Switching off cleaning function Turn both control knobs to the 12 o’clock position. The cleaning function and the cooktop are switched off. www.bora.com...
The remaining time appears on the control knob display (for more than 2 minutes to the nearest minute, from 2 minutes in seconds). Once the time runs out, an acoustic signal sounds for 2 minutes and 000 flashes on the control knob display. www.bora.com...
Wait until the grilling zone displays are no longer flashing (= optimum cleaning temperature of 70°C). Dilute a dessert spoon of citric acid (approx. 10 –15 ml) in a bowl of warm water (approx. 200 ml). Pour the liquid on the grill surface. www.bora.com...
Rinse the knob ring well after cleaning. Dry the knob ring carefully. Place the dry knob ring back on the knob housing. Make sure it is positioned correctly (0 position). If necessary, turn the knob ring to the 12 o’clock position (= 0 position). www.bora.com...
After troubleshooting, turn the knob ring to the 12 o’clock position (0 position). In all other cases, contact the BORA Service Team (see section ‘Warranty, technical service and spare parts) and enter the error number displayed and the device type.
Take the old appliance to a regional collection point upwards. for return and recycling electrical and electronic Remove any other accessories. components and other materials. Dispose of the old device and any contaminated accessories as described under “ Environmentally- friendly disposal”. www.bora.com...
In order to file a warranty claim, the end customer is to The BORA Service Team will require the type designation notify their dealer or BORA of the fault and must present and serial number of your device (FD number).
Page 32
F +49 (0) 8035 / 9840-300 F +43 (0) 5373 / 62250-90 info@bora.com mail@bora.com www.bora.com www.bora.com Austria: Australia - New Zealand: BORA Vertriebs GmbH & Co KG BORA APAC Pty Ltd Innstraße 1 100 Victoria Road 6342 Niederndorf Drummoyne NSW 2047 Austria Australia...