Power Setting; Bridging Function - bora PKT11 Operating And Installation Instructions

Operation
EN
Adjusting the power level
Turn the selector ring to the desired power level
X X
(temperature).
The control knob display indicates the target
Q Q
temperature for 3 seconds. After this, the actual
temperature flashes while the grilling zone heats up.
Once the target temperature has been reached, the
Q Q
display stops flashing.
To view the target temperature set while the grilling
X X
zone is heating up, tap the touch-operated area.
Temperature Power levels
configuration
150°C
160°C
170°C
180°C
190°C
200°C
210°C
220°C
230°C
250°C
Tab. 6.2 Power level temperatures
Setting a low power level
INFO Additional power levels are available in the low
temperature range (80 – 140°C).
INFO The selector ring position for the low power levels
is between the 12 o'clock and 1 o'clock positions.
Fig. 6.3 Selector ring position for the low power levels
(and the cleaning function)
24
Power levels
configuration
C30 C31 + C32
150 1
160 2
170 3
180 4
190 5
200 6
2 10 7
220 8
230 9
250 P
15°
Turn the selector ring approximately 15° clockwise
X X
from the 12 o'clock position until it lightly engages.
appears on the control knob display.
Q Q c
Tap the touch-operated area.
X X
The first low temperature level is activated.
Q Q
Tap the touch-operated area again to increase or
X X
decrease the temperature.
Each time you tap the touch-operated area again, the
Q Q
next power level up is activated.
On reaching the highest of the low power levels, each
Q Q
tap reduces the power by 1 level.
Temperature Low power levels
configuration
C30 + C32
80°C
90°C
100°C
110°C
120°C
130°C
140°C
Tab. 6.3 Low power level temperatures

6.3.2 Power setting

Switching on the power setting
INFO Both grilling zones are equipped with a power-
enhancing power setting.
Turn the selector ring to the 10 o'clock position.
X X
appears on the control knob display and the power
Q Q P
setting is activated.
After 10 minutes, the cooking zone is automatically
Q Q
switched back to power level
Switching the power setting off early
Turn the selector ring to the desired power level.
X X
The power level set is active and shown on the control
Q Q
knob display.

6.3.3 Bridging function

INFO If the bridging function is active, both grilling
zones are simultaneously operated at the same
power level.
INFO If the bridging function is active, the temperature
is only displayed on the right control knob.
Low power levels
configuration
C31
80
90 .
100
1 10 :
120
130 *
140
.
9
www.bora.com