Timer Functions; Pause Function; Safety Devices; Residual Heat Display - bora PKT11 Operating And Installation Instructions

4.3.6 Timer functions

There are two different timer functions available for each
grilling zone.
appears on the control knob display.
Q Q t
INFO You can set a time range of between
1 and 120 minutes for the timer functions.
Timer function
INFO The timer function is an automatic cut-off function
for automatically switching off a grilling zone.
Short-time timer (egg timer)
INFO The short-time timer depends on the grilling zone
being switched off and works like a conventional
egg timer.

4.3.7 Pause function

The cooking session can be temporarily interrupted
(max. 10 minutes).
appears on the control knob display.
Q Q I I
4.4

Safety devices

4.4.1 Residual heat display

INFO Do not touch the cooking zone or place any heat-
sensitive objects on top of it while
the control knob display (residual heat display).
Risk of burns and fire!
The grilling zone remains hot after switching it off.
appears on the control knob display (residual heat
H
display). The display goes out after a sufficient cooling
time (temperature < 50°C).

4.4.2 Safety shut-down

Each grilling zone is switched off automatically if it
exceeds the maximum operating duration at a certain
power level or heat retention level.
control knob display (residual heat display).
www.bora.com
is shown on
H
appears on the
H
Power level Switch off after hours:minutes
6:00
1
6:00
2
5:00
3
5:00
4
4:00
5
1:30
6
1:30
7
1:30
8
1:30
9
0:10
P
Tab. 4.3 Safety shut-down for power levels
Heat retention level Switch off after hours:minutes
8:00
1 ( )
,
8:00
2 ( )
:
8:00
3 ( )
*
Tab. 4.4 Safety shut-down for heat retention levels
To put the cooking zone back into operation, switch
X X
the grilling zone back on (see the Operation section).

4.4.3 Overheating protection

INFO If the cooktop overheats, the power is reduced or
the cooktop is switched off completely.
The device is fitted with overheating protection. The
overheating protection can be triggered if:
Cookware is heated up empty.
Q Q
Oil or fat is heated on high power.
Q Q
A hot cooking zone is switched on again after a power cut.
Q Q
Whilst the overheating protection is active, one of the
following steps is taken:
The activated power setting is switched back to the
Q Q
previous level.
The power setting P can no longer be switched on.
Q Q
The set power level is reduced.
Q Q
The cooktop switches off completely.
Q Q
After a sufficient cooling period, the cooktop can be used
again in full.

4.4.4 Childproofing feature

The childproofing feature prevents the cooktop from
being switched on accidentally.
appears on the control knob display.
Q Q L
The childproofing feature can only be activated when all
the cooking zones are switched off (see the Operation
section).
Device description
EN
13