Related Manuals for bora PT11
Summary of Contents for bora PT11
- Page 1 Operating and installation instructions PT11 Tepan stainless steel grill PT11UMEN-001 1037301 www.bora.com...
- Page 2 T +49 (0) 8035 / 907-240 F +49 (0) 8035 / 907-249 info@bora.com www.bora.com The distribution and duplication of this document, as well as the use and disclosure of its contents are prohibited unless expressly authorised. © BORA Lüftungstechnik GmbH, 2016 All rights reserved.
-
Page 3: Table Of Contents
Decommissioning, disassembly and disposal Decommissioning ..........22 Disassembly ............22 Disposing of the product in an environmentally friendly way ......22 Warranty, service and spare parts 10.1 Warranty ............23 10.2 Service .............. 23 10.3 Spare parts ............23 www.bora.com... -
Page 4: General
INFO BORA Holding GmbH, BORA Vertriebs Safety and warning instructions GmbH & Co KG, BORA APAC Pty Ltd and BORA Lüftungstechnik GmbH - hereinafter referred The safety and warning instructions in this manual are to as BORA - shall not assume any liability for emphasised with symbols and signal words. - Page 5 Caution Indicates a possible hazardous situation which can cause minor injury if not respected. — Caution Indicates a situation which can cause minor injury if not respected. Tab. 1.2 Meaning of the warning symbols and signal words www.bora.com...
-
Page 6: Safety
Steam can cause a short circuit on live released into the room air. parts and thus lead to property damage (see the Cleaning chapter). XDo not place any hot cookware in the area of the control panel so as not to damage the underlying electronics. www.bora.com... -
Page 7: Safety Instructions, Operation
Objects (pot lid, cooktop extractor cover) on the cooktop become hot very quickly and can lead to serious burns. XDo not leave any objects on the cooktop. XUse suitable aids (pot cloths, thermal glove). www.bora.com... -
Page 8: Safety Instructions, Assembly
Work on electrical parts may only be carried 3 mm (miniature and automatic out by trained electrical personnel. circuit breakers, fuses, contactors). www.bora.com... -
Page 9: Safety Instructions, Spare Parts
Danger of electric shock! beyond the purpose described here. Disconnecting the device incorrectly BORA shall not assume any liability for from the mains poses a risk of damages caused by improper use or incorrect electric shock. -
Page 10: Technical Data
Front cooking zone 300 x 235 mm 2400 W Back cooking zone 300 x 235 mm 2400 W Temperature control range 60 - 250°C Tab. 3.1 Technical data Device dimensions Fig. 3.1 Device dimensions Fig. 3.2 Control box dimensions www.bora.com... -
Page 11: Device Description
Tab. 4.2 Recommendations for power levels The specifications provided in the table are standard values. Fig. 4.2 Control knobs Control knob for the front grilling zone Power level sleeve Control knob for the back grilling zone Operating indicator light www.bora.com... -
Page 12: Installation
Preparing the worktop If there are any missing or damaged parts, please notify BORA After Sales Service immediately. Create the worktop cut-out taking into account the Do not under any circumstances install parts which are specified cut-out dimensions. - Page 13 1116 1088 Fig. 5.4 Dimension of groove for flush installation 1338 1310 INFO If the induction glass ceramic wok is used, the groove dimensions must be increased to 7 mm for flush installation. 1709 1681 Tab. 5.2 Cut-out dimensions www.bora.com...
-
Page 14: Installing The Cooktop
The total dimensions of the adjustment plates [2] and the fixed front panel [3] should be 36 mm. Fig. 5.8 Installed control box and cooktop The total dimensions of 36 mm must be adhered to in order to ensure that the control box [1] functions smoothly. www.bora.com... -
Page 15: Installing The Cooktop
Put on the control knob [6]. Place the mounting rail [2] in the worktop cut-out. Insert the cooktop [1]. Align the cooktop [1] exactly. Align the mounting rail [2] so that it is positioned evenly under the cooktop and the cooktop extractor PL540. www.bora.com... -
Page 16: Power Connection
If the connection line has been damaged this must be replaced by a special connection line. This may only be done by an authorized member of the After Sales Service team. Establishing the power connection Switch off the main switch/automatic circuit breaker before connecting the cooktop. www.bora.com... -
Page 17: Handover To User
Once installation is done: Explain the important functions to the user. Explain all safety-relevant aspects of operation and handling to the user. Provide the user with the accessories and operating and installation instructions to be kept in a safe place. www.bora.com... -
Page 18: Operation
Push and turn the control knob to power level switch on the grilling zone. The operating indicator light is active. Switch off the grilling zone Turn the control knob to power level , to switch off the grilling zone. www.bora.com... -
Page 19: Cleaning And Maintenance
Dissolve a tablespoon of citric acid (approx. 10–15 ml) with hot water (approx. 200 ml) in a separate bowl. Now apply the liquid to the warm stainless steel grill surface. Leave the liquid to soak for approx. 5 - 8 minutes. www.bora.com... -
Page 20: Cleaning The Control Knobs
Pull off the control knob. Clean the control knob with a soft brush. Rinse the control knob well after cleaning. Allow the control knob to dry thoroughly. Re-insert the clean and dry control knob into the slot after the cleaning is completed. www.bora.com... -
Page 21: Troubleshooting
Wait a few operating hours. Contact the new cooktop is put into operation. appliances. BORA Service Team if the odour persists. Tab. 8.1 Resolving a fault In all other instances, call the BORA Service Team (see the Warranty, service and spare parts chapter). www.bora.com... -
Page 22: Decommissioning, Disassembly And Disposal
Remove the device from the worktop upwards. for return and recycling of electronic and electrical Remove further accessory parts. parts and other materials. Remove the old appliance and dirty accessory as described under “Disposing of the product in an environmentally friendly way”. www.bora.com... -
Page 23: Warranty, Service And Spare Parts Warranty
10.3 Spare parts Only use original spare parts when making repairs. INFO Spare parts can be obtained from your BORA dealer, the BORA online service website at www.bora.com/service or by calling the service number provided. - Page 24 F +49 (0) 8035 / 907-249 F +61 2 8076 3514 info@bora.com info@boraapac.com.au www.bora.com www.boraapac.com.au Austria: BORA Vertriebs GmbH & Co KG Prof.-Dr.-Anton-Kathrein-Straße 3 6342 Niederndorf Österreich T +43 (0) 5373 / 62250-0 F +43 (0) 5373 / 62250-90 mail@bora.com www.bora.com...
Need help?
Do you have a question about the PT11 and is the answer not in the manual?
Questions and answers