Configuration Menu; Accessing The Configuration Menu; Select Menu Option - bora PKT11 Operating And Installation Instructions

5.6

Configuration menu

Once installation is complete, you can adjust the basic
settings for the cooktop. These can then be changed at
any time.

5.6.1 Accessing the configuration menu

Turn the control knob to the 11 o'clock position.
X X
The control knob display shows
Press the touch surface of the control knob for one
X X
second. The display changes to
Press the touch surface again within 3 seconds and
X X
hold for 5 seconds.
The control knob display shows
Q Q
the configuration menu is available.

5.6.2 Select menu option

Turn the knob ring to select the menu option you want.
X X
The following menu options are available:
Menu options
Warning beep volume
C 0
Select operating mode (normal operation or demo mode)
C 1
0° or 180° installation
C 2
Control knob display type
C 3
Availability of the pause function
C 9
Tab. 5.5 Menu options in the configuration menu
Touch the touch surface on the control knob again for
X X
1 second to confirm the menu you want.
The sub-menu is accessed and the display switches to
Q Q
a three-character combination (e.g.
INFO In the three-character combination shown, the
right-hand figure shows the value saved in the
system.
Setting the volume of the warning beep
Once you have confirmed menu option
the volume of the warning beep.
www.bora.com
.
t
.
000
, a beep is heard and
C
).
C 23
, you can set
C 0
Setting Warning beep volume
100% (max. volume)
C 00
10% (min. volume)
C 0 1
20%
C 02
30%
C 03
40%
C 04
50%
C 05
60%
C 06
70%
C 07
80%
C 08
90%
C 09
Tab. 5.6 Warning beep volume
Select operating mode
Once you have confirmed menu option
the operating mode.
Setting Operating mode
Normal operation
C 1 0
Demo mode
C 1 1
Tab. 5.7 Operating modes
INFO All the control knob functions are available in
demo mode. The heating function for the cooktop
is deactivated. Demo mode is used, for example,
for exhibitions.
0° or 180° installation
In menu option , you can set whether the cooktop is
C 2
installed rotated by 180°.
Setting Display
0° installation
C 20
180° installation
C 2 1
Tab. 5.8 Installation direction
INFO For installation rotated by 180°, the setting
correctly assigns the correct cooking zones inside
the control knob display.
Installation
EN
Factory setting
, you can select
C 1
Factory setting
Factory setting
C 2 1
21