Safety Instructions - Installation; Safety Instructions - Cleaning And Maintenance - bora PKT11 Operating And Installation Instructions

Bora pro tepan stainless steel grill with 2 cooking zones
Table of Contents

Advertisement

Safety
EN
2.3
Safety Instructions – Installation
The appliance must only be installed and
assembled by trained specialists who are familiar
with and comply with the standard national
regulations and supplementary regulations of the
local utility companies.
Work on electrical components must be
conducted by trained electrical personnel.
The electrical safety of the appliance is only
guaranteed if it is connected to a protective
conductor system that has been installed in line
with regulations. Ensure that this basic safety
precaution is met.
Check the appliance for visible damage prior
X
X
to installation.
Do not install any damaged appliance.
X
X
A damaged appliance may put your safety at
Q
Q
risk.
Repair and maintenance work may only be
carried out by specialists authorised by the
manufacturer.
DANGER!
Risk of asphyxiation!
Packaging components (e.g. film,
polystyrene) can be life-threatening for
children.
Store all packaging components out
X
X
of reach of children.
Dispose of the packaging properly
X
X
and immediately.
2.3.1 Safety Instructions – Cooktop
installation
DANGER!
Risk of electric shock!
Connecting the appliance to the mains
incorrectly poses a risk of electric
shock.
Make sure that the appliance has a
X
X
fixed connection to the mains
voltage.
Make sure that the appliance is
X
X
connected to a properly installed
protective conductor system.
Make sure that technical equipment
X
X
is provided to enable all of the
appliance's poles to be disconnected
from the mains with a contact
opening width of at least 3 mm (LS
switch and automatic circuit
breakers, fuses, contactor).
8
DANGER!
Risk of electric shock!
The connection cable can be damaged
if it comes into contact with hot
cooking zones. A damaged connection
cable can cause a (fatal) electrical
shock.
Make sure that the connection cable
X
X
does not come into contact with hot
cooking surfaces.
Make sure that the connection cable
X
X
does not become trapped or
damaged.
CAUTION!
Lifting heavy loads can cause back
injuries!
If not handled correctly, removing and
installing the appliance can cause
injuries to the limbs or torso.
Removing the cooktop from the
X
X
packaging is a two-person job.
Placing the cooktop into the worktop
X
X
cut-out is a two-person job.
Use appropriate aids to prevent
X
X
damage or injuries to limbs or torso.
2.4
Safety instructions – Cleaning
and Maintenance
The appliance must be cleaned at regular
intervals. Dirt can lead to damage or bothersome
odours. Remove dirt immediately.
Any work involving cleaning and maintenance
Q
Q
must not be carried out by children unless
they are supervised at all times while doing
so.
Do not use a steam cleaner for cleaning.
X
X
Steam can cause a short circuit on live parts
and thus lead to property damage (see the
Cleaning and Maintenance chapter).
When cleaning, ensure that no water
X
X
penetrates the appliance. Use only a slightly
damp cloth. Never spray the device with
water. Water penetration can cause damage!
Whenever possible, clean the cooktop after
X
X
every use.
Clean the cooktop only after it has cooled
X
X
down (see the Cleaning and Maintenance
chapter).
When cleaning, only use non-abrasive
X
X
detergents to prevent scratching and abrasion
on the surface.
www.bora.com

Advertisement

Table of Contents
loading

Table of Contents